焊接专机设备保养如同设备体检，其主要目的是：通过设备保养发现设备存在的问题，对发现的问题进行处理或提出处理建议。尽量避免设备问题的恶化，减少设备损失，减少偶发山东焊接专机停机事件，更好的保障设备的有效运行。

The maintenance of the special welding machine is like the physical examination of the equipment. Its main purpose is to find out the problems of the equipment through the maintenance of the equipment, and deal with the problems found or put forward treatment suggestions. Try to avoid the deterioration of equipment problems, reduce equipment losses, reduce the occasional shutdown of Shandong welding special aircraft, and better ensure the effective operation of equipment.

冷却系统的清理

Cleaning of cooling system

由于切屑长时间在冷却箱内不断沉积，切屑过多后影响冷却箱有效容积，易造成滤网堵塞，影响冷却泵正常抽取冷却液。

Due to the continuous deposition of chips in the cooling box for a long time, the effective volume of the cooling box will be affected after too much chips, which is easy to block the filter screen and affect the normal extraction of coolant by the cooling pump.

冷却系统的清理可避免或减少加工过程中出现的冷却流量不足或冷却停止等现象。

The cleaning of cooling system can avoid or reduce the phenomenon of insufficient cooling flow or cooling stop during processing.

冷却液自身是有使用寿命的，如乳化液长时间使用不清理不更换，变质后的乳化液污染加工环境，防锈防腐性能缺失后易损坏设备机械部件。

The coolant itself has a service life. If the emulsion is used for a long time without cleaning and replacement, the deteriorated emulsion will pollute the processing environment, and the mechanical parts of the equipment will be easily damaged after the lack of anti-rust and anti-corrosion performance.

液压系统的清理

Cleaning of hydraulic system

液压系统中的泵头、电磁阀、液压缸等部件在运行过程中会产生磨损，磨损产生的微小金属粉末与液压油混合在一起，使液压油洁净度逐渐下降，污染的液压油会加剧液压系统的磨损。

The pump head, solenoid valve, hydraulic cylinder and other components in the hydraulic system will wear during operation. The tiny metal powder produced by wear will be mixed with the hydraulic oil, which will gradually reduce the cleanliness of the hydraulic oil. The contaminated hydraulic oil will aggravate the wear of the hydraulic system.

液压系统的清理，液压油的更换，可提高液压系统的使用寿命，保证液压系统的运行稳定。

The cleaning of the hydraulic system and the replacement of the hydraulic oil can improve the service life of the hydraulic system and ensure the stable operation of the hydraulic system.

气动系统的清理

Cleaning of pneumatic system

气动系统过滤器的检查清理，是保证设备气源质量的重要步骤。

The inspection and cleaning of the pneumatic system filter is an important step to ensure the quality of the equipment air source.

针对一些配有主轴轴承气雾润滑，主轴轴承吹气，光栅尺吹气，对刀仪吹气等场合，对气源质量要求非常严格，若机床过滤系统损坏或存在隐患，易造成较大的经济损失。

For some occasions equipped with spindle bearing air mist lubrication, spindle bearing air blowing, grating ruler air blowing, tool setting instrument air blowing, etc., the air source quality requirements are very strict. If the filter system of the machine tool is damaged or has hidden dangers, it is easy to cause large economic losses.

散热系统风扇

Cooling system fan

散热系统风扇及相关过滤网长时间运行，易造成过多油泥灰尘堆积，过滤堵塞影响空气流通，风扇油泥过多影响风扇运转。

The fan of the cooling system and the relevant filter screen operate for a long time, which is easy to cause excessive sludge and dust accumulation, filter blockage affects the air circulation, and excessive fan sludge affects the fan operation.

散热系统运行不良或故障易造成设备过热，引起相关部件损坏。

Poor operation or failure of the cooling system may easily cause overheating of the equipment and damage to relevant components.

此外过多污物堆积在导轨丝杠周边，易造成导轨丝杠磨损。过多污物堆积导轨护板下方，易堵塞冷却液回流孔、回流槽，阻塞后过高液位造成丝杠、轴承、电机浸泡，造成相关部件损坏。您有需求可以随时咨询联系我们http://www.tayfsk.com！

In addition, too much dirt is accumulated around the guide screw, which is easy to cause wear of the guide screw. Too much dirt is accumulated under the guide rail guard plate, which is easy to block the coolant return hole and return groove. After blocking, the high liquid level will cause the lead screw, bearing and motor to soak, causing damage to relevant parts. You can contact us at any time if you need http://www.tayfsk.com ！