焊接滚轮架上用的轴承窜动的原因
来源:http://www.tayfsk.com/ 发布时间:2021-09-08 浏览次数:0
焊接滚轮架使高温焊接区免遭空气损害外,实验断定维护气体混合比。维护气体除了阻隔空气。还在肯定水平上影响乃决议着电弧的形态特征、工艺特性以及焊缝的冶金特性。
In addition to the welding roller frame to protect the high-temperature welding area from air damage, the experiment determined to maintain the gas mixing ratio. Maintenance Gas in addition to blocking air. It also affects and even determines the morphological characteristics of arc, process characteristics and metallurgical characteristics of weld.
依据工件钢种、板厚、焊缝空间方位、焊接接头质量要求、焊接生产率以及合理的维护气体混合比,能够确保焊缝成形杰出,防止飞溅发生等。咱们依据二氧化碳和氩气在焊接进程中的不同效果,断定一个合理范围,并通过实验验证,当比例为时质量优。
According to the steel type of workpiece, plate thickness, weld space orientation, quality requirements of welded joints, welding productivity and reasonable maintenance gas mixing ratio, it can ensure excellent weld formation and prevent spatter. According to the different effects of carbon dioxide and argon in the welding process, we determine a reasonable range, and through experimental verification, when the proportion is high, the quality is excellent.
焊接滚轮架中的主动盯梢体系直接影响熔池定位;而设备各传动装置的不协调将导致焊接工程不安稳或中止。焊接进程中。主动焊对焊件坡口、压力容器环境和资料的要求比较严厉,焊接工艺改善依据工艺规划要求。
The active tracking system in the welding roller frame directly affects the positioning of the molten pool; The uncoordinated driving devices of the equipment will lead to instability or suspension of the welding project. During welding. Active welding has strict requirements for weldment groove, pressure vessel environment and data, and the improvement of welding process is based on the requirements of process planning.
咱们针对出现的焊接问题进行原因剖析,并逐项进行治理、验证和调整。内环缝气体维护焊对各项工艺参数进行实验,研讨并断定参数习惯值,使其相互匹配,尤其是焊枪方位的控制。通过电视监督体系和三维电动十字板中的012轴滑板,随时依据焊接状况,调整焊枪方位,才干确保焊接进程的平稳。
We analyze the causes of welding problems, and manage, verify and adjust them one by one. The gas maintenance welding of inner circumferential seam carries out experiments on various process parameters, discusses and determines the habitual values of parameters to make them match each other, especially the control of welding gun orientation. Through the television supervision system and the 012 axis sliding plate in the three-dimensional electric vane, adjust the orientation of the welding gun according to the welding condition at any time, so as to ensure the stability of the welding process.
上一篇:数控切割机传动滑轴故障排除及维护!
下一篇:焊接变形和应力产生的原因和预防