自动焊接设备是一种高科技设备，稍不小心就可能会造成人员的伤害或者是设备的损害。所以，在设备的使用中要多加注意，使用时需要注意以下危险：

Automatic welding equipment is a high-tech device that can cause personal injury or equipment damage if not taken seriously. So, it is important to pay more attention to the use of the equipment and pay attention to the following hazards when using it:

1.电击危险：自动焊接设备需要使用高电压电源，如果操作不当或设备损坏，可能会导致电击事故。

1. Electric shock hazard: Automatic welding equipment requires the use of a high voltage power supply. Improper operation or equipment damage may lead to electric shock accidents.

2.火灾危险：自动焊接设备需要使用高温火焰进行焊接，如果操作不当或设备损坏，可能会引发火灾。

2. Fire hazard: Automatic welding equipment requires the use of high-temperature flames for welding. Improper operation or equipment damage may cause a fire.

3.爆炸危险：自动焊接设备需要使用气体或液体燃料进行焊接，如果操作不当或设备损坏，可能会引发爆炸事故。

3. Explosion hazard: Automatic welding equipment requires the use of gas or liquid fuel for welding. Improper operation or equipment damage may cause explosion accidents.

4.辐射危险：山东自动焊接设备在焊接过程中会产生紫外线、红外线、电磁波等辐射，如果长时间暴露在这些辐射下，可能会对人体造成伤害。

4. Radiation hazard: Shandong automatic welding equipment can generate radiation such as ultraviolet, infrared, and electromagnetic waves during the welding process. If exposed to these radiation for a long time, it may cause harm to the human body.

5.化学危险：自动焊接设备在焊接过程中会产生有害气体和粉尘，如果操作不当或设备损坏，可能会对人体造成危害。

5. Chemical hazard: Automatic welding equipment can produce harmful gases and dust during the welding process. If operated improperly or the equipment is damaged, it may cause harm to human health.

检查

security check

每次焊接操作通电前，操作员应检查以下项目：

Before each welding operation is powered on, the operator should check the following items:

1.安装时确保焊机良好的相互接地可靠。

1. Ensure that the welding machine is well grounded and reliable during installation.

2.确保焊机的输出线和输入线完好无损且不外露。

2. Ensure that the output and input wires of the welding machine are intact and not exposed.

3.焊机安装固定后，应由熟悉行业的人员定期进行检查(多时间不超过6个月)。

After the welding machine is installed and fixed, regular safety inspections should be conducted by professionals familiar with the industry (no more than 6 months at most).

4.内部不得有松动等异常情况。

4. There should be no looseness or other abnormal situations inside.

为了避免这些危险，使用自动焊接设备时需要严格遵守操作规程和操作规范，必要时需要佩戴防护设备，如防护眼镜、手套、面罩等。同时，需要定期检查设备的性能，确保设备处于良好的工作状态。您有需求就来我们网站http://www.tayfsk.com咨询了解吧！

To avoid these dangers, it is necessary to strictly follow the operating procedures and safety operating regulations when using automatic welding equipment. If necessary, protective equipment such as safety glasses, gloves, masks, etc. should be worn. At the same time, it is necessary to regularly check the safety performance of the equipment to ensure that it is in good working condition. Come to our website if you have any needs http://www.tayfsk.com Consult and understand!