As an automatic welding equipment, occasional failure is normal. Now let's introduce the common faults of pipe automatic welding machine? We hope that through our sharing, we can help you have more experience and understanding of the use of equipment!

管管自动焊机不易起弧1.如果导电喷嘴烧坏，更换导电喷嘴

Pipe automatic welding machine is not easy to arc 1 If the conductive nozzle burns out, replace the conductive nozzle

2.如果焊丝的选择与实际情况不一致，则选择合适的焊丝档位

2. If the selection of welding wire is inconsistent with the actual situation, select the appropriate welding wire gear

3.应根据手册中的规范选择不当的焊接规范

3. Improper welding specifications shall be selected according to the specifications in the manual

4.如果焊丝伸出长度不合适，调整焊丝伸出长度启动后，送丝缓慢，无法正常焊接

4. If the extension length of the welding wire is not appropriate, adjust the extension length of the welding wire. After starting, the wire feeding is slow and normal welding cannot be carried out

1.焊接电源故障见管道自动焊机说明书

1. For welding power failure, see the manual of pipeline automatic welding machine

2.如果二次线接触不良，检查或通知维修或制造商工件不旋转

2. If the secondary line is in poor contact, check or notify the maintenance or manufacturer that the workpiece does not rotate

1.驱动电机断电，保险丝熔断；检查驱动电机的电源

1. The drive motor is powered off and the fuse is blown; Check the power supply of the drive motor

2.变频驱动保护；请参阅变频器的说明那么以上就是我们管管自动焊机厂家为大家带来的全部内容解读了，希望只要在使用中注意这些细节，那么我们的工作就会有很好的运行效率！

2. Variable frequency drive protection; Please refer to the description of the frequency converter. Then the above is the interpretation of all the contents brought by our pipe automatic welding machine manufacturer. I hope that as long as we pay attention to these details in use, our work will have good operation efficiency!