随着科技、数字化、自动化等技术的不断发展以及对焊接设备的高度重视，我国的自动化焊接设备与过去相比有了很大的飞跃，逐步走向科技化，因此自动化焊接设备随着市场需求而诞生。那么山东自动焊接设备使用时的防范及措施是怎样的呢？

With the continuous development of science and technology, digitization, automation and other technologies and the high attention paid by the country to welding equipment, China's automatic welding equipment has made a great leap compared with the past, and gradually moved towards science and technology, so automatic welding equipment was born with the market demand. So what are the precautions and measures for the use of Shandong automatic welding equipment?

1、焊接、切割作业时，清理工作环境1m范围内的所有易燃易爆物品。注意工作环境的沟渠和下水道内是否有易燃液体和可燃气体，是否有可燃易爆物质泄漏到沟渠和下水道中，避免焊渣和金属火花造成灾难。

1. During welding and cutting operations, clean all inflammable and explosive materials within 1m of the working environment. Pay attention to whether there are flammable liquids and gases in the ditches and sewers in the working environment, and whether there are flammable and explosive substances leaking into the ditches and sewers, so as to avoid disasters caused by welding slag and metal sparks.

2、高空焊接和切割时，禁止将电极头四处乱扔，底部的焊割操作应隔离。作业结束后，应进行仔细细致的检查，确认无火灾隐患后方可离开现场。

2. When welding and cutting at high altitude, it is forbidden to throw the electrode head around, and the welding and cutting operation at the bottom should be isolated. After the operation, carefully and carefully check and confirm that there is no fire hazard before leaving the site.

3、应使用符合有关标准和规定的气瓶，在气瓶的储存、运输和使用过程中，应严格遵守操作规程。

3. Gas cylinders that comply with relevant national standards and regulations shall be used. During the storage, transportation and use of gas cylinders, safety operation procedures shall be strictly followed.

4、输送可燃气体和助燃气体的管道，应当按照规定安装、使用和管理，并对操作人员和检查人员进行专门的技术培训。

4. The pipelines transporting combustible gas and combustion-supporting gas shall be installed, used and managed according to regulations, and special safety technical training shall be provided for operators and inspectors.

5、在对燃料容器和管道进行焊补时，应根据实际情况确定焊补方法。实施置换法时，置换要彻底，工作中要严格控制可燃物的遮蔽。实施无压法时，应按要求保持一定的电压。工作时应严格控制氧气含量。要加强检测，注意监测，有组织措施。

5. When repairing the fuel container and pipeline, the welding method shall be determined according to the actual situation. When implementing the replacement method, the replacement should be thorough, and the shielding of combustible materials should be strictly controlled during the work. When implementing the voltage-free method, a certain voltage shall be maintained as required. Oxygen content shall be strictly controlled during operation. We should strengthen detection, pay attention to monitoring, and take safety organization measures.

自动焊接设备在各行业应用中的作用越来越大，应用范围也在迅速扩大。由于焊接技术的特殊性和焊接设备的广泛使用，焊接设备的发展一直受到社会各界的关注，如果您对此有需要，可以来我们网站http://www.tayfsk.com进行咨询了解！

Automatic welding equipment plays an increasingly important role in various industries, and its application scope is also expanding rapidly. Due to the particularity of welding technology and the wide use of welding equipment, the development of welding equipment has always been concerned by all sectors of society. If you need it, you can come to our website http://www.tayfsk.com Consult and understand!