自动焊接设备是一种为焊接提供一定电源特性的设备，广泛应用于现代工业生产。自动焊机的装置和操作一定符合技术规范和规范，这直接关系到焊接操作的作用。那么今天小编就带大家一起了解一下山东自动焊接设备的运转及相关操作。

Automatic welding equipment is a kind of equipment that provides certain power characteristics for welding and is widely used in modern industrial production. The device and operation of automatic welding machine must conform to the technical specifications and specifications, which is directly related to the role of welding operation. So today, Xiaobian will take you to understand the operation and related operations of Shandong automatic welding equipment.

1.按要求装置好电加热式CO2气体减压器

1. Install the electrically heated CO2 gas pressure reducer as required

2.运用前有必要先预热5-10分钟;

2. It is necessary to preheat for 5-10 minutes before use;

3.缓缓将气瓶上的阀门打开(速度约5度/秒)，这时可观察到压力表的指针慢慢抬起，然后停在适宜的刻度上。

3. Slowly open the valve on the cylinder (at a speed of about 5 degrees/second), and then observe that the pointer of the pressure gauge slowly rises, and then stops on the appropriate scale.

4.闭合设备电气箱空气开关对设备上电，检查电气箱和机身是否漏电(发现漏电须扫除后进行下一步操作)。

4. Close the air switch of the electrical box of the equipment to power on the equipment, and check whether the electrical box and the machine body have leakage (if any leakage is found, clean it up and carry out the next operation).

6.检查减速箱是否加注润滑油，发现异常须按本减速机保护规范处理。

6. Check whether the gearbox is filled with lubricating oil. If any abnormality is found, it shall be handled according to the reducer protection specification.

8.在操作面板上挑选正确作业状态：“调试”档位合适本机手动操控作业;“自动”档位合适程序化自动焊接作业。

8. Select the correct operation status on the operation panel: the "commissioning" gear is suitable for manual operation of the machine; "Automatic" gear is suitable for programmed automatic welding operation.

9.调整好适当参数(作业台回转速度)和正确转向，启动设备进行正常操作和作业。

9. Adjust the appropriate parameters (table rotation speed) and correct steering, and start the equipment for normal operation and operation.

10.能够在焊机的操控面板上进行功用挑选和部分参数设定。

10. Be able to select functions and set some parameters on the control panel of the welding machine.

11.焊机的操控面板所对应的功用有指示灯显示，在运用过程中对应的指示灯被点亮即可进行对应的操作。(特别留意当焊机过热时，机内温度指示灯会被点亮，此刻留意操控好焊机的运用时间或暂停运用该设备)

11. The function corresponding to the control panel of the welding machine has indicator light display, and the corresponding operation can be carried out when the corresponding indicator light is lit during operation. (Pay special attention to that when the welding machine overheats, the temperature indicator in the machine will be lit. At this moment, pay attention to the operation time of the welding machine or suspend the use of the equipment)

以上就是对自动焊接设备运转以及未来发展方向的详细介绍，希望通过介绍，大家对自动焊接有了更加深入的了解，想要了解更多关于自动焊接发展前景以及创新技术，请点击官网http://www.tayfsk.com！

The above is a detailed introduction to the operation of automatic welding equipment and its future development direction. I hope that through the introduction, you can have a deeper understanding of automatic welding. If you want to know more about the development prospect and innovative technology of automatic welding, please click the official website http://www.tayfsk.com ！