操作人员在使用自动化焊接设备的过程中，要注意使用方法，并做好保养，以免设备出现损坏，影响正常工作。下面我们就来看看延长山东自动化焊接设备使用寿命就要做好哪些事项。

During the use of automatic welding equipment, operators shall pay attention to the use method and do a good job of maintenance to avoid damage to the equipment and affect the normal work. Now let's take a look at what needs to be done to extend the service life of Shandong automatic welding equipment.

1.定期做好检测工作。比如查看设备通电时，冷却风扇的旋转是否平顺;是否有异常的振动，声音和气味;气体是否有漏泄;电焊线的接头及绝缘之包扎是否有松懈或剥落;焊接电缆线及各接线部位是否有异常的发热现象等。

1. Carry out regular inspection. For example, check whether the cooling fan rotates smoothly when the equipment is powered on; Whether there is abnormal vibration, sound and smell; Whether the gas leaks; Whether the binding of welding wire joints and insulation is loose or peeling; Whether there is abnormal heating phenomenon in the welding cable and wiring parts.

2.由于设备是强迫风冷的，很容易从周围吸入尘埃并积存于机内。所以我们可以定期对其进行清理，以免影响设备的正常使用。尤其是变压器、电抗线圈及线圈卷间的空隙缝和功率半导体等部位要特别清拭干净。

2. As the equipment is forced air cooling, it is easy to inhale dust from the surrounding and store it in the machine. Therefore, we can clean it regularly so as not to affect the normal use of the equipment. In particular, the gap between transformers, reactance coils and coils, power semiconductors and other parts shall be cleaned.

3.定期检查电力配线的接线部位。检查入力侧、出力侧等部位，以及外部配线的接线部位，内部配线的接线部位等部位的接线螺丝是否有松动，生锈时要把锈除去使接触导电良好。

3. Regularly check the wiring position of power wiring. Check whether the connection screws at the input side, output side and other parts, as well as the connection parts of the external wiring and the internal wiring are loose. Remove the rust to ensure good contact and conductivity.

4.自动焊接设备长期的使用难免会使外壳因碰接而变形，生锈而受损伤，内部零件也会磨损，因此定期对零件进行更换，修补外壳，并对绝缘劣化部位进行补强。不好的零件在做保养时尽量全部一次更换以保证设备的性能。

4. The long-term use of automatic welding equipment will inevitably cause the shell to be deformed, rusted and damaged due to contact, and the internal parts will also be worn. Therefore, the parts shall be replaced regularly, the shell shall be repaired, and the insulation deteriorated parts shall be reinforced. The bad parts should be replaced as soon as possible during maintenance to ensure the performance of the equipment.

5.对导电嘴定期进行检查。由于磨损导电嘴的孔径变大，就会引起电弧不稳定，焊缝外观恶化或粘丝(回烧);导电嘴末端粘上飞溅，送丝会变得不平滑;导电嘴拧得不紧，螺纹连接处会发热而焊死。

5. Regularly check the conductive nozzle. As the aperture of the worn conductive nozzle becomes larger, the arc will be unstable, the appearance of the weld will deteriorate or the wire will stick (burn back); The end of the contact tip is stuck with spatter, and the wire feeding will become uneven; If the contact tip is not screwed tightly, the threaded connection will be heated and welded.

为了避免自动焊接设备在使用中出现故障问题，操作人员一定要注意使用方法，并做好保养，这样也能及时发现问题，延长其使用寿命。关注我们http://www.tayfsk.com带您了解更多相关内容！

In order to avoid the failure of automatic welding equipment in use, the operator must pay attention to the use method and do a good job in maintenance, so that problems can be found in time and the service life can be extended. Follow us http://www.tayfsk.com Learn more about it!